Call us at Did you know that you can use the LatticeAx indent and cleaving tool at the PennState Materials Research Institute? The LatticeAx 420 is located in the Nanofabrication Laboratory cleanroom. It has improved the success rates for preparing cleaved samples in comparison to manual techniques using handheld tools. The LatticeAx is simple to use and can […]
Monthly Archives: February 2017
Scribing and Cleaving Samples Into 1 mm Wide Strips
Some analytical instruments can only accept small samples and with limited height. Sample preparation by scribing and cleaving is often the best solution. LatticeGear’s scribing and cleaving tools are used to prepare narrow samples for high resolution SEM and STEM. The video shows two methods of preparing 1 mm wide strips. One narrow sample was […]